Medical RK3288 Rockchip

The RK3288 is an older chipset and is supported by Rockchip up to Android 10. The medical tablets have a built-in NFC sensor that can be integrated into apps via an API.

NFC API

Center Control Button APK

Compatible Rockchip flash tool: Android Tool_Release v2.63

Compatible Rockchip ADB drivers: Rockchip Driver Assistant v5.1.1

Firmware for different production batches and sizes:

Firmware for 10-inch

• Batch 2019 Android 8
• Batch 2021/04 Android 8 & 10

Firmware for 13-inch

• Batch 2020 Android 8
• Batch 2021 Android 10
• Batch 2021 Linux

Firmware for 15-inch

• Batch 2021 Android 10

Instructions for flashing:

1. Install the "Release_DriverAssitant" driver.
2. Launch the Android tool
3. Connect the MicroUSB port to the PC and the tablet.
4. Press the Volume + and Power buttons at the same time to power on the device. Hold them down for about 3–5 seconds; you should then see a "Loader Device" in RKDevTool. Continue to step 6. Or another option: Plug in the power adapter. The tablet boots normally. You will now see an ADB device in RKDevTool
5. Then press the "Switch" button
6. Click the "Firmware" button under the "Upgrade Firmware" tab and select the Linux/Android image
7. The tablet should now turn off the screen, and "Loader Device" should appear in the Android Tool; this takes about 30 seconds.
8. Then press the "EraseFlash" button; this is only necessary if there are errors or when changing the system.
9. Once the process is complete, you can click the "Upgrade" button, and the image will flash Linux/Android onto the system.
10. The device will restart automatically after the update is complete.