RK3568 Design Tablet
Item Number: 213191
ADB Driver Installation Software: Download
RKDevTool v3.19 flashing software: Download
LED Control via http: Download
Enable proxy settings: Download
Information about the serial interface: Download
API NFC LED & SDK: Download
Instructions for flashing the firmware:
- Install the "Release_DriverAssitant" driver.
- Launch the Android tool
- Connect the USB-C port to the PC and the tablet, and plug in the power adapter
- You will now see an ADB device in the Android Tool
- Click the "Firmware" button under the "Upgrade Firmware" tab and select the Linux/Android image
- Then press the "Switch" button
- The tablet should now turn off the screen, and "Loader Device" should appear in the Android Tool; this takes about 30 seconds.
- Then press the "EraseFlash" button; this is only necessary if there are errors or when changing the system.
- Once the process is complete, you can click the "Upgrade" button, and the image will flash Linux/Android onto the system.
- The device will restart automatically after the update is complete.