8-inch RGB RK3568

Android 13: Download

Android 11: Download

Linux Debian 11: Download

Firmware Upgrade Instructions:

USB & NFC API: Download Directory

LED API, LED Control HTTP, etc.: Download Directory

Remove Root: Download Directory

Enable Security PIN: Download Directory

1. Install the "Release_DriverAssitant" driver.
2. Launch the Android tool
3. Connect the USB-C port to the PC and the tablet, and plug in the power adapter
4. You should now see an ADB device in RKDevTool
5. Click the "Firmware" button under the "Upgrade Firmware" tab and select the Linux/Android image
6. Then press the "Switch" button to start loader mode. Loader mode can also be accessed using the recovery button, which is located in the headphone jack. Press it with a toothpick or a ballpoint pen refill, then turn on the power. The USB cable must be connected.
7. The tablet should now turn off the screen, and "Loader Device" should appear in the Android Tool; this takes about 30 seconds. 6. Then press the "EraseFlash" button; this is only necessary if there are errors or when changing the system
8. Once the process is complete, you can click the "Upgrade" button, and the image will flash Linux/Android onto the system.
9. The device will restart automatically after the update is complete.