Medical RK3568 Rockchip

The RK3568 is a current Rockchip chipset as of 2025. The CPU consists of 4x A55 ARM cores. Its performance is sufficient for most applications. The current version of Android is 13. Linux Debian can also be installed on the displays.

NFC API

Center Control Button APK

Middle Control Button API

Compatible Rockchip flash tool: RKDevTool 3.13

Compatible Rockchip ADB drivers: Rockchip Driver Assistant v5.1.1

Medical Display Firmware

10-inch Firmware

10-inch Android 11: Download

10-inch Android 13: Download

10-inch Linux Debian 11: coming soon

13-Inch Firmware

13-inch Android 11: Download

13-inch Android 13: Download

13-inch Linux Debian 11: Download

15-inch Firmware

15-inch Android 11: Download

15-inch Android 13: Download

15-inch Linux Debian 11: Download

Instructions for Flashing Medical Displays:

1. Install the "Release_DriverAssitant" driver.
2. Launch the Android tool
3. Connect the USB-C port to the PC and the tablet.
4. Press the Volume + and Power buttons at the same time to power on the device. Hold them down for about 3–5 seconds; you should then see a "Loader Device" in RKDevTool. Continue to step 6. Or another option: Plug in the power adapter. The tablet boots normally. You will now see an ADB device in RKDevTool
5. Then press the "Switch" button
6. Click the "Firmware" button under the "Upgrade Firmware" tab and select the Linux/Android image
7. The tablet should now turn off the screen, and "Loader Device" should appear in the Android Tool; this takes about 30 seconds.
8. Then press the "EraseFlash" button; this is only necessary if there are errors or when changing the system.
9. Once the process is complete, you can click the "Upgrade" button, and the image will flash Linux/Android onto the system.
10. The device will restart automatically after the update is complete.